New Canon LP-E6 Battery needs charging and discharging cycle first before the regular usage. Because battery from factory to the users' hands that exists the time differences, and the electrode materials will be its passivation for the battery of the longer time difference, which is why the purchase of new batteries need to be completely filled with charging and discharging cycle three times to eliminate electrode materials passivation, to activate canon lp-e5 Battery performance, to reach maximum capacity. Meanwhile, the digital camera has the data transmission agreement end between battery and the digital camera, after the need of two or three times charged and discharged cycle, the percent of its real capacity can keep pace with the percent of content on the digital camera's screen. Cycle's steps: insert in digital camera to discharge until the shutdown, and then recharge the battery, charging time must be over 12 hours, to repeat the action of charging and discharging for three times.
The proper use of digital camera battery usually will be very crucial. Discharge can not fully take end, there are about 5 percent of electricity charging, we should not be spent replenishment. Otherwise, it will accelerate the aging batteries scrapped. If the relatively high Canon LP-E6 battery capacity (such as more than 80 percent) under the charge of the case, will accelerate the aging of Canon LP-E6 battery. Use lithium ion batteries in 25 to 35 degrees centigrade, will show better performance. The low temperature or high temperature than the above state, its performance will be greatly devalued.
When using the Canon LP-E6 battery, fever is a normal phenomenon, because in the process of the Canon LP-E6 battery charged and discharged, energy conversion will result in heat and at the same time the amount of heat will be transmitted to the battery. But if overheated (burning), stop using it immediately and ask for the professinonals to check.
When not using it, charge it to about 50 percent's energy and take out of it from equipment and stored in temperature :10-20 degrees centigrade, humidity :45-75 percent. Do this each day and more than one charge, and discharge cycles to eliminate passivation of electrode materials, and activate battery performance.
Prevent the liquid entering into the Canon battery LP-E6. Once liquid immersing into batteries, stop using it, dry with a dry cloth and put it in the ventilation to dry, otherwise they will result in danger.
Don't let the Canon LP-E6 digital camera battery near the fire source, not subject to any pressure, otherwise they will lead to danger.
If the replacement battery for Canon LP-E6 charged and discharged after three complete cycle, performance or significance still decline indicate that you should change the battery.
next blog: How to Fix Problems Using the Wireless on My HP Pavilion dv6000 battery
more tages: SONY NP-FW50 Battery, NIKON EN-EL14 Battery, NIKON EN-EL3E Battery,SONY NP-FR1 Battery,SONY NP-FT1 Battery, canon lp-e8 Battery
No comments:
Post a Comment